Roll Blind

Replacement

[Removal]
1. Remove the roof trim.

2. After loosening the mounting screws, then remove the roll blind lower bracket (A).




3. Remove the roll blind (A) by pulling it at a right angle.

CAUTION:
- When you removing it, be care of that an edge (B) is dashed against the frame of vehicle because the roll blind tension looses.





[Installation]
1. Install is the roll blind (A).

CAUTION:
- When you install it, be care of that an edge (B) is dashed against the frame of vehicle because the roll blind tension looses.





NOTE:
- When the tension of roll blind is removed, Push an edge (B), Turn it counterclockwise 19 - 21, Install it by removing the push.

2. Install the screws to the roll blind lower bracket (A).




3. Install the roof trim.