Repair procedures

Replacement

CAUTION:
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Put on gloves to protect your hands.

1. Remove the front seat shield inner cover.

2. Remove the front seat shield outer cover.

3. Remove the protector (A).




4. Disconnect the connectors (A).




5. Push the protector(A), and then front seat cushion cover (C) from the front seat frame (B).




6. Remove the front seat cushion cover (A) from the front seat frame.




7. After removing the velcro tape (A) and hog-ring clips (B) on the front of seat cushion and remove the front seat cushion cover (C).




8. Installation is the reverse of removal.

NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
- Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).