Repair procedures

Replacement

1. After loosening the mounting bolts, then remove the rear seat cushion assembly (A).

Tightening torque :
16.7 - 25.5N.m (1.7 - 2.6kgf.m, 12.3 - 18.8lb-ft)




2. Disconnect the rear seat cushion heater connector (A).




3. After loosening the mounting bolts, then remove the rear seat back assembly (A).

Tightening torque :
16.7 - 25.5N.m (1.7 - 2.6kgf.m, 12.3 - 18.8lb-ft)




4. Disconnect the rear seat back heater connector (A) and airbag connector (B).
[LH]




[RH]




5. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.