Repair Procedures

Removal

1. Remove the rear wheel and tire.

Tightening torque:
88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

2. Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 7.6 lb-ft)




3. Remove the rear seat back.

4. Disconnect the rear wheel speed sensor connector.
5. Installation is the reverse of removal.

CAUTION:
Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAAF-1).
When inserting the sensor, take care the O-ring not to be damaged.