Repair Procedures

Removal

1. Remove the lower oil pan.

2. Remove the oil pump chain cover (A).

Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)




3. Remove the bolt (A) and then separate the chain with sprocket from the oil pump.

Tightening torque :
18.6 - 21.6N.m (1.9 - 2.2kgf.m, 13.7 - 15.9lb-ft)




4. Remove the oil pump (A).

Tightening torque :
20.6 - 22.6N.m (2.1 - 2.3kgf.m, 15.2 - 16.6lb-ft)





NOTE:
When installing, use a new O-ring.

5. Install in the reverse order of removal.

Installation

1. Install the oil pump (A).

Tightening torque :
20.6 - 22.6N.m (2.1 - 2.3kgf.m, 15.2 - 16.6lb-ft)





NOTE:
Always use a new O-ring.

2. Install the oil pump sprocket and the oil pump chain on the oil pump, and tighten the sprocket bolt (A).

Tightening torque :
18.6 - 21.6N.m (1.9 - 2.2kgf.m, 13.7 - 15.9lb-ft)




3. Install the oil pump chain cover (A).

Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)




4. Install the lower oil pan.

5. After assembly, wait at least 30 minutes before filling the engine with oil.