Exhaust Manifold: Specifications

Install the LH exhaust manifolds stay (A),and then remove the LH exhaust manifold (B) and gasket.

Tightening torque
Stay bolt 24.5 - 35.3 N.m (2.5 - 3.6 kgf.m, 18.1 - 26.0 lb-ft)
Manifold nuts 49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)






Install the RH exhaust manifolds stay (A),and then remove the RH exhaust manifold (B) and gasket.

Tightening torque
Stay bolt 24.5 - 35.3 N.m (2.5 - 3.6 kgf.m, 18.1 - 26.0 lb-ft)
Manifold nuts 49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)






NOTE: When installing the exhaust manifold, tighten the nuts with pre-torque first and then tighten the nuts with specified torque in the sequence shown.