Console Lamp: Service and Repair

Inspection

Overhead Console Lamp
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.



















Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the overhead console lamp assembly with removal.
3. Remove the overhead console lamp after disconnecting the Panorama roof switch connector and lamp connector (A).








4. If necessary to replace the bulb, replace the bulb (B).

Installation

1. Install the overhead console lamp after connecting the Panorama roof switch connector and lamp connector.
2. Install the lens after tightening 2 screws.