Diesel Data: Automotive Repair

Repair Procedures





Fuse Inspection

1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Removal

Passenger Compartment Junction Box (IPM)
1. Disconnect the negative(-) battery terminal.
2. Remove the crash pad lower panel.

3. Disconnect the connectors (A) from the IPM (Intelligent intergrated Platform Module).




4. Remove the IPM after loosening the mounting nuts (4EA).
5. Disconnect the connectors from the back side of the IPM.

Installation

1. Install IPM (Intelligent intergrated Platform Module).
2. Connect the IPM connector.
3. Install the crash pad lower panel.