Trailing Arm: Service and Repair

Replacement

1. Remove the rear wheel & tire.

Tightening torque:
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
- Be careful not to damage to the hub bolts when removing the front wheel & tire.

2. Loosen the bolts and then height sensor bracket (A) and brake cable (B).




3. Disconnect the parking brake connector (A).




4. Loosen the bolts and then remove the trailing arm (A) with the rear axle.

Tightening torque:
44.1 - 53.9N.m(4.5 - 5.5Kgf.m, 32.5 - 39.8lb-ft)




5. Loosen the mounting bolt and then remove the trailing arm (A) with the frame.

Tightening torque:
98.1 - 117.7N.m(10.0 - 12.0Kgf.m, 72.3 - 86.8lb-ft)




6. Installation is the reverse of removal.