Repair procedures

Replacement

1. Remove the front driveshaft.

2. Remove the TJ joint assembly.

3. Using a pillar or flat-tipped(-) screwdriver, remove the both side of clamp(B) of the dynamic damper(A).




4. Fix the driveshaft (A) with a vice (B) as illustrated.




5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
6. Separate the dynamic damper (A) from the shaft (B) carefully.






Installation

1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
2. Install the dynamic damper (A).
3. Using the SST(09495-3K000), secure the dynamic damper bands (B).




4. Install the TJ joint assembly.

5. Install the front driveshaft.