Air Bypass Valve: Service and Repair

Inspection

1. Turn the ignition switch OFF.
2. Disconnect the RCV control solenoid valve connector.
3. Measure resistance between the valve terminals 1 and 2.
4. Check that the resistance is within the specification.

Specification:Refer to "Specification"

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the RCV control solenoid valve connector (A) and hose (B).




3. Remove the RCV control solenoid valve bracket after remove the bracket installation bolts (A).










Installation

1. Installation is the reverse order of removal.

RCV control solenoid valve bracket installation bolt:9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)