Front Door Panel: Service and Repair

Replacement

Front Door Trim Replacement

CAUTION:
- Take care not to scratch the door trim and other parts.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the front door quadrant inner cover (A).




2. Using a screwdriver or remover, remove the front door grip handle outer cover (A).




3. Loosen the front door trim mounting bolts.

Tightening torque :
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)




4. Using a screwdriver or remover, remove the front door inside handle cap (B).
5. After loosening the mounting screws, then remove the front door trim (A).




6. Disconnect the inside handle cage (A).




7. Disconnect the connectors (A).




8. Disconnect the power window connector (A).




9. Installation is the reverse of removal.

NOTE:
- Make sure of connectors is plugged in properly and each rod is connected securely.
- Make sure the door lock and opens properly.
- Replace any damaged clips.