Engine Room Under Cover
Removal and Installation
1. Loosen the mounting clip and bolt and then remove the under cover(A).
Tightening torque:
6.8 - 10.7N.m (0.7 - 1.1kgf.m, 5.0 - 7.9 lb-ft)
2. Install in the reverse order of removal.
Removal and Installation
1. Loosen the mounting clip and bolt and then remove the under cover(A).
Tightening torque:
6.8 - 10.7N.m (0.7 - 1.1kgf.m, 5.0 - 7.9 lb-ft)
2. Install in the reverse order of removal.