Oil Cooler: Service and Repair

Removal

1. Loosen the drain plug and drain the coolant. Open the radiator cap to make rapid draining.

2. Disconnect the oil cooler hose(A).




3. Remove the oil filter(A) with the SST(09263-2E000, the oil filter wrench).




4. Loosen the mounting bolt(A), and then remove the oil cooler(B).






Installation

1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler(C) with fix bolt (B).

Tightening torque :
50.0 - 55.8 N.m (5.1 - 5.7kgf.m, 36.8 - 41.2 lb-ft)




2. Install the oil filter(A) with the SST(09263-2E000, the oil filter wrench).

Tightening torque :
11.7 - 15.6 N.m (1.2 - 1.6kgf.m, 8.6 - 11.5 lb-ft)




3. Install the oil cooler(A).




4. Fill the radiator with coolant and check for leaks.