Muffler: Service and Repair

Removal and Installation

1. Disconnect the battery negative terminal.
2. Disconnect the rear oxygen sensor connector (A).




3. Remove the rear oxygen sensor.

4. Remove the front muffler (A).

Tightening torque:
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)




5. Remove the center muffler (A).

Tightening torque :
39.2 - 58.8N.m (4.0 - 6.0kgf.m, 28.9 - 43.4lb-ft)




6. Remove the main muffler (A).

Tightening torque :
39.2 - 58.8N.m (4.0 - 6.0kgf.m, 28.9 - 43.4lb-ft)




7. Install in the reverse order of removal.

NOTE:
When installing, replace with new gaskets.