Diesel Data: Automotive Repair
Home >> Hyundai >> 2013 >> Veloster L4-1.6L Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Sensors and Switches - HVAC >> Ambient Temperature Sensor / Switch HVAC >> Service and Repair >> Ambient Temperature Sensor (ATS)

Ambient Temperature Sensor (ATS)





Inspection

1. Turn the ignition switch OFF.
2. Disconnect the ATS connector.
3. Measure resistance between the ATS terminals 1 and 2 [B1/S1].
4. Check that the resistance is within the specification.

Specification:Refer to "Specification"

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the Ambient Temperature Sensor connect (A).
3. Remove the Ambient Temperature Sensor bracket (B).






Installation

CAUTION:
- Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.

1. Installation is reverse of removal.
Diesel-Data.com