Evaporative Emission Control Canister: Service and Repair
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Lift the vehicle.
3. Disconnect the vapor tube quick-connector (A,B) and the ventilation hose (C).
4. Remove the canister assembly after removing installation bolts (D).
Inspection
1. Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube
A: Canister <-> Atmosphere (Fuel tank air filter)
B: Canister <-> Intake manifold
C: Canister <-> Fuel tank
Installation
Installation is the reverse of removal.
Canister bracket installation bolt:
19.6 - 29.4 N.m (2.0 - 3.0 kgf.m, 14.5 - 21.7 lb-ft)
Canister installation bolt:
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)