Removal and Installation

CYLINDER HEAD

CAUTION:
^ When installing rocker arms, camshaft and oil seal, lubricate contacting surfaces with new engine oil.
^ When tightening cylinder head bolts, camshaft sprocket bolts and camshaft bracket bolts, lubricate bolt threads and seat surfaces with new engine oil.
^ If a hydraulic lash adjuster is kept on its side, there is a risk of air entering it. When hydraulic lash adjusters are removed, stand them straight up or soak them in new engine oil.
^ Do not disassemble hydraulic lash adjusters.
^ Attach tags to lash adjusters so as not to mix them up.





Removal
^ The removal procedure is the same as for timing chain.

Installation
^ Installation procedures are the same as for timing chain.