Diagnosis Procedure

THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR DOES NOT SOUND


Diagnosis Procedure

1.CHECK PARKING BRAKE WARNING LAMP
1. Start the engine.
2. Check the operation of the brake warning lamp by operating the parking brake.

Parking brake ON : ON
Parking brake OFF : OFF

Is the inspection result normal?
YES - Replace the combination meter.
NO - GO TO 2.
2.CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
Perform a check for the parking brake switch signal circuit. Diagnosis Procedure (A/T Models) (A/T models) or Diagnosis Procedure (M/T Models) (M/T models).
Is the inspection result normal?
YES - GO TO 3.
NO - Repair harness or connector.
3.CHECK PARKING BRAKE SWITCH UNIT
Perform a unit check for the parking brake switch. Component Inspection.
Is the inspection result normal?
YES - Replace the combination meter.
NO - Replace the parking brake switch. Exploded View (pedal type) or Exploded View (lever type).