Removal and Installation

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seat assembly (LH/RH). Removal and Installation.
2.Remove the rear seat cushion. Removal and Installation.
3.Remove accelerator pedal pad. Removal and Installation.





4.Disengage clip of floor hook (1) with remover tool (A).





5.Remove foot grille (LH/RH). Foot Grille.
6.Remove front seat belt floor anchor bolt (LH/RH). Exploded View.
7.Remove center console. Removal and Installation.
8.Remove rear floor duct.
- Rear Floor Duct 1 (Without Rear Ventilator).
(without REAR VENTILATOR)
- Rear Floor Duct 1 & Rear Ventilator Duct 1 (With Rear Ventilator). (with REAR VENTILATOR)
9.Remove instrument lower cover, instrument driver lower panel and instrument assist lower panel.
Removal and Installation A/T Models.
10.Remove instrument side panel (LH/RH). Removal and Installation A/T Models.
11.Remove Yaw rate/G-sensor.
Removal and Installation.
12.Remove diagnosis sensor unit.
Removal and Installation.
13.Remove floor harness mounting clamps.
14.Remove console rear bracket.
Removal and Installation.
15.Remove dash side finisher, front kicking plate inner, center pillar lower garnish, and rear kicking plate inner, front body side welt (LH/RH), rear body side welt (LH/RH).
Removal and Installation.
16.Remove floor trim mounting clips and fixing nuts.





17.Remove floor trim from floor trim fixing clips (A) and remove floor carpet (1).

INSTALLATION

Install in the reverse order of removal.