Removal and Installation

AIR BREATHER HOSE

VQ25HR (AWD) : Removal and Installation


REMOVAL

1.Separate propeller shaft assembly (front). Exploded View.
2.Remove air breather tube from water outlet (rear).
3.Remove air breather hoses from air breather tube.
4.Remove A/T air breather hose from A/T assembly..

INSTALLATION

Note the following and install in the reverse order of removal.

CAUTION:
- Never bend the A/T air breather hose to prevent damage to the hose.
- Insert A/T air breather hose to A/T air breather tube all the way to the curve of the tube.
- Insert air breather hoses to air breather tube all the way to the curve of the tube.





- Be sure to insert it fully until its end reaches the radius curve end when inserting A/T air breather hose (1) to air breather tube.





- Install A/T air breather hose to air breather tube so that the paint mark (A) is facing upward.


- Securely install the clip to the brackets when installing A/T air breather hose to the bracket.