Exhaust Manifold Heat Shield

Exhaust Manifold Heat Shield Replacement

Removal Procedure





1. Remove the air cleaner resonator outlet duct.
2. Remove the transmission filler tube stud nut from the A.I.R. adapter and move the filler out of the way.
3. Remove the oil level indicator tube.
4. Remove the oxygen sensor from the exhaust manifold.





5. Remove the 4 manifold heat shield nuts and remove the heat shield.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the exhaust manifold heat shield with the 4 nuts.
^ Tighten the exhaust manifold heat shield nuts to 10 Nm (89 inch lbs.).
2. Install the oxygen sensor.
3. Install the oil level indicator.
4. Move the transmission filler tube back onto the stud and secure the tube with the nut.
^ Tighten the transmission filler tube bracket nut to 10 Nm (89 inch lbs.).
5. Install the air cleaner resonator outlet duct.