Hinge Replacement - Endgate Lower - Body Side

Hinge Replacement - Endgate Lower - Body Side

Removal Procedure

1. Remove the endgate from the vehicle.
2. Mark the position of the endgate hinge using a grease pencil.




3. Remove the bolts retaining the hinge to the vehicle.
4. Remove the hinge from the vehicle.

Installation Procedure




1. Install the hinge to the vehicle.
2. Position the hinge in the position marked during removal.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts retaining the hinge to the body.

Tighten the hinge to body bolts to 25 N.m (18 lb ft).

4. Install the endgate to the vehicle.
5. Inspect and adjust the endgate alignment.