Cruise Control Vacuum Hose: Service and Repair

VACUUM SUPPLY HOSE
- Open the bonnet and fit wing protection.
- Remove the relay mounting bracket securing bolts situated left-hand inner wing.
- Reposition the relay mounting bracket for access.
- Disconnect the hose from the vacuum dump valve.
- Disconnect the hose from the vacuum pump.
- Disconnect the vacuum hose from the actuator.
- Remove the hose assembly and disconnect hoses from 'T' piece.
- Connect new hoses to the 'T' piece and fit the assembly, routing the longest hose to the actuator.
- Remove wing covers and close bonnet.