Fuel Pressure Regulator: Service and Repair

- Open the luggage compartment and displace the right-hand front side liner.
- Displace the fuel pump relay (silver relay on black / yellow base) from mounting at rear of hockey stick panel and remove the relay.
- Crank the engine to depressurize the fuel system.
- Reposition the relay and trim liner.
- Disconnect the vehicle battery.
- Open the bonnet and fit wing protection.

Fig. 1 Regulator:

- Disconnect the vacuum hose (1 Fig. 1) from the pressure regulator valve.
- Position suitable cloth to catch possible fuel residue.
- Undo and release the fuel return hose from the regulator.
- Fit blanking plugs to the regulator and hose.
- Undo the fuel rail to regulator union nut (2 Fig. 1).
- Remove the nut securing the unit to the mounting bracket (3 Fig. 1) and remove the regulator (4 Fig. 1).
- Fit blanking plugs to the regulator and fuel rail.
- Reverse the above procedure when replacing the regulator.