Fault Code 41
Fault Code 41LH Fresh/Recirc. Motor
The resistance between pins 1 and 3, servo unit 5-way connector, should read 4.8 - 7.2 K Ohms.
If the resistance is outside of the set limits, renew the servo unit.
The motor operation can be checked by applying battery voltage to pin 5, motor 5-way connector, and ground to pin 4 of the connector. The motor arm should rotate smoothly in a clockwise direction. Renew the motor if the arm does not rotate smoothly.
Apply battery voltage to pin 4, servo unit Sway connector, and ground to pin 5. The motor arm should rotate smoothly in a anti-clockwise direction. Renew the motor if the arm does not rotate smoothly.
Inspect the harness for open circuit or short circuit to ground. repair as necessary. If no harness faults are apparent, renew the Air Conditioning Control Module A/CCM.