Cover Front, Backrest

Seat - Cover Front, Backrest 76.70.15

Removal
1. Remove the front seat.
2. Remove the front seat adjustment switches.








3. Remove the front seat backrest trim panel.
- The backrest trim panel is secured by clips. Care must be taken when removing the trim panel.







4. Detach the wiring harness.







5.
1. Detach the wiring harness.
2. Disconnect the electrical connectors.







6. Detach the front seat backrest cover.







7. Detach the lower section of the seat backrest cover.
- Remove the clips.
8. Remove the headrest.







9. Remove both headrest guides.
1. Depress the guide.
2. Remove the guide.







10. Remove the air bag module.
1. Disconnect the side air bag module electrical connector.
2. Remove the nuts.
3. Remove the side air bag module.
11. Remove then seat backrest cover and squab.







12. Detach with care the seat backrest cover.







13. Carefully remove the retaining trim rings.

Installation







1. NOTE: When installing the backrest cover start to install the cover from the center line and work outwards.


To install, reverse the removal procedure.