Rear Quarter Trim Capping

Removal
1. Fully lower convertible top.







2. Remove seat belt upper anchor.
- Remove seat belt upper anchor bolt cover.
- Remove seat belt upper anchor bolt.
- Remove seat belt anchor and spacer.







3. Remove rear quarter capping.
1. Remove fastener securing rear quarter capping to B post extension.
2. Slacken and remove three screws securing the capping.

4. Lift rear quarter capping and remove from vehicle.

Installation







1. Install rear quarter capping.
1. Using a new fastener secure rear capping to B post extension.
2. Install the three capping screws.

2. Install seat belt anchor spacer.
3. Position anchor on spacer.
4. Install seat belt upper anchor bolt and tighten to 34-46 Nm.
5. Install seat belt upper anchor bolt cover.
6. Raise convertible top.