Steering Wheel: Service and Repair

Speed Control Switch

Removal


NOTE: The speed control switch is an integral part of the steering wheel and is not available separately.


1. Remove the driver air bag module.







2. Centralize the steering wheel.







3. Detach and disconnect the switchpacks electrical connector.







4. Detach the steering wheel.
- Remove and discard the steering wheel retaining bolt.







5. Remove the steering wheel.
1. Guide the wiring harnesses through the steering wheel aperture.
2. Remove the steering wheel.

Installation







1. NOTE: Install a new steering wheel retaining bolt.


To install reverse the removal procedure.
- Tighten to 40 Nm.