Instrument Panel Ducts - Installation

INSTALLATION

NOTE: Illustrations shown with instrument panel removed from vehicle for clarity.

NOTE: LHD model shown in illustrations. RHD model similar.

DRIVER SIDE DUCT

NOTE: The driver side instrument panel duct is serviced only as an assembly with the driver side demister duct.





1. Position the driver side instrument panel duct and demister duct assembly (1) onto the top of the instrument panel support (5).
2. Connect the driver side instrument panel duct to the center duct (4). Make sure the ducts are fully engaged to each other.
3. Connect the driver side demister hose (3) to the demister duct. Make sure the hose is fully engaged to the defroster and demister duct.
4. Install the four screws (2) that secure driver side instrument panel duct and demister duct assembly to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
5. Install the instrument panel top cover Instrument Panel Cover - Installation.
PASSENGER SIDE DUCT





6. Position the passenger side instrument panel duct (4) onto the top of the instrument panel support (5).
7. Connect the passenger side instrument panel duct to the center duct (1) and the passenger side demister duct (3). Make sure the ducts are fully engaged to each other.
8. Install the two screws (2) that secure passenger side instrument panel duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
9. Install the instrument panel top cover Instrument Panel Cover - Installation.
CENTER DUCT





10. Position the center instrument panel duct (5) onto the top of instrument panel support (6). Rotate and tilt the duct as necessary.
11. Install the two screws (2) that secure the center duct to the two brackets (4). Tighten the screws to 2.2 Nm (20 in. lbs.).
12. Install the instrument panel ducts (1 and 3) .