Fuel Filler Neck: Service and Repair

Removal

1. Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A).




2. Disconnect the fuel filler hose (A) and the vapor hose (B).




3. Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).






Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation nut :
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)
Filler-neck assembly installation screw :
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)