Component Inspection

Engine Control
P0704 Clutch Switch Input Circuit Malfunction - Inspection/Repair:_:Component Inspection

Component Inspection

Visual Inspection
1. Repair if the clutch pedal and switch is abnormally installed
Check Clutch Switch
1. IG KEY "OFF".
2. Disconnect Clutch Switch connector.
3. Check continuity between clutch switch component signal terminal and Ground terminal as depressing clutch pedal.

Specification :Clutch pedal depressed : Continuity ( below 1.0Ohms )
Clutch pedal released : Discontinuity ( Infinite Ohms )

4. Is the measured resistance within the specification?