Repair Procedures

Replacement

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not bend or scratch the cover and other parts.

1. After loosening the mounting clips, then remove the radiator grille upper cover (A).




2. Loosen the mounting bolts.




3. After loosening the front bumper side's mounting screw, then disconnect the side's.




4. Remove the front bumper lower mounting clips.




5. Disconnect the fog lamp connector (A).
6. Remove the front bumper cover.




7. Installation is the reverse of removal.

NOTE:
- Make sure the connectors are connected in properly.
- Replace any damaged clips.