Motor Forward/Rearward

MOTOR FORWARD/REARWARD

Service repair no - 78.70.25

Remove

1. Remove front seat.
2. Remove 2 plugs from seat inner valance retaining screws. Remove 2 screws.







3. Remove inner valance.
4. Disconnect multiplug from forward/rear motor.







5. Release multiplug from bracket. Remove strap securing motor harness to motor mounting bracket.
6. Remove 2 screws securing motor mounting bracket to gearbox bracket.
7. Remove bolt and shouldered spacer securing gearbox to mounting bracket.
8. Remove rear nut securing forward/rear slide bracket to cross tubes.







9. Slacken front nut securing forward/rear slide bracket to cross tubes.
10. Remove spring clip securing drive cable cover to gearbox.







11. Remove 4 screws securing motor to mounting bracket.
12. Release forward/rear slide bracket from rear cross tube.
13. Raise slide bracket. Disconnect drive cable from gearbox.
14. Remove drive cable from motor. Remove motor from mounting bracket.
15. Remove second drive cable from gearbox.

Refit

16. Reverse removal procedure.