Coil Low Tension Lead - Engine Misfire
9/6/9512/04/95/US
SUBJECT
Coil Low Tension (Primary) Lead - Care Point - Misfire
MODEL
Range Rover 4.0 SE
AFFECTED VEHICLES
LP 300190 onwards
LH
LJ
LD
DETAIL
During any service or maintenance repair work in the area of the left hand rocker cover on the V8 engine, it is important to be aware that the low tension (primary) wire routing is critical in the vicinity of the rocker cover to head joint.
Care should be taken when re-fitting the rocker cover to prevent the coil low tension (primary) lead from becoming trapped between the rocker cover and the cylinder head, as this will lead to an engine misfire condition.
ACTION REQUIRED
When carrying out any service or repair work, take care to prevent the low tension (primary) lead from becoming trapped between the cylinder head and the rocker cover.
PARTS INFORMATION
Not Applicable
PROCEDURE
Refer to the workshop manual section 12 rocker cover gasket replacement.
Follow the procedure for replacing the rocker cover gasket.
Ensure when refitting the rocker cover that the coil low tension (primary) lead is clear of the joint between the left hand rocker cover and cylinder head.
WARRANTY
Not Applicable
COMP. CODE
Not Applicable
SRO
Not Applicable