Driver Side

Service repair no - 76.73.71

Remove
1. Disconnect both battery terminals, negative lead first.
2. Disconnect Supplementary Restraint System (SRS) 'shorting link'.







3. Unscrew 4 bolts (TX 30 Torx bit) securing module to steering wheel.


NOTE: Fixings remain captive in steering wheel.







NOTE: Rotate steering wheel for access to all fixings.


4. Release module from steering wheel, disconnect multiplug.
5. Remove module.


CAUTION: Store the airbag module correctly. See Description and operation.







Refit


NOTE: If a new airbag module is being fitted, the serial numbers must be recorded.


6. Position module and connect multiplug.
7. Tighten bolts to 9 Nm. (7 lbf.ft)
8. Connect SRS 'shorting link' and secure connector to location.
9. Connect battery terminals, positive before negative. Fit and secure battery cover.
10. Check SRS using TestBook.