Glove Box and Lid

GLOVE BOX AND LID

Service repair no - 76.52.03 - Glove Box
Service repair no - 76.52.02 - Glove Box
Lid Service repair no - 76.52.13 - Glove Box Lid - Align

Remove

1. Remove centre screw from 2 scrivet fasteners. Release closing panel for access to glove box hinge fixings. Collect outer parts of fasteners from closing panel.







2. Remove 2 bolts securing glove box hinges to fascia frame.
3. Open glove box lid, remove 5 screws securing glove box. Release glove box from fascia.







4. Disconnect glove box lamp multiplug.
5. Disconnect cable latch, remove glove box assembly.







Glove Box Lid

6. Remove split pin, disengage gas strut from lid.







7. Remove 2 bolts and square nuts, remove lid from glove box.

Refit Glove Box Lid

8. Position lid to glove box and secure with bolts and square nuts.
9. Engage gas strut, secure with split pin.

Refit Glove Box Assembly

10. Position glove box assembly, connect lamp multiplug. Secure cable latch.
11. Open glove box lid, align assembly to fascia. Secure with screws.
12. Fit bolts securing hinges to fascia frame, do no tighten.
13. Check alignment and latching of glove box lid, adjusting hinges as necessary using central adjusting screws.
14. Tighten screws, hinges to fascia.
15. Close glove box lid.
16. Position closing panel. Secure with scrivet fasteners.