Sensor - Parking Aid - Rear - Inner

Sensor - Parking Aid - Rear - Inner

Service Repair No - 86.54.23

Remove

1. Remove rear bumper assembly.







2. Remove 7 bolts and 5 screws securing closing panel and remove panel.







3. Disconnect multiplug from sensor.
4. Release and remove sensor and sensor housing.

Refit

1. Clean sensor location on bumper.
2. Fit sensor housing to bumper, ensuring lug on housing is aligned with cut-out in bumper.
3. Fit and secure sensor to housing.
4. Connect multiplug.
5. Fit closing panel and secure with bolts and screws.
6. Fit bumper assembly.