Louvre Panel Assembly - Centre Fascia

76.46.42 Louvre Panel Assembly - Centre Fascia

Remove

1. Remove radio cassette player from fascia.







2. Carefully release and remove radio DIN socket from louvre panel.
3. Remove screw cover from radio aperture.
4. Remove drink tray assembly.







5. Carefully release clock assembly from louvre panel.
6. Disconnect multiplugs from clock and door locking switch. Remove clock assembly.







7. Carefully release switch pack from louvre panel.
8. Disconnect multiplugs from switches and remove switch pack.
9. Models without A/C: Carefully remove blower speed and heater control knobs.







10. Models without A/C: Remove 2 screws securing heater control panel graphic plate and remove graphic plate.







11. Models without A/C: Remove 4 screws securing heater control panel to louvre panel.







12. Models with A/C: Carefully release ATC ECU from louvre panel, disconnect multiplugs and remove ATC ECU.







13. Loosen 2 upper screws and remove 4 remaining screws securing louvre panel to fascia.
14. Remove louvre panel assembly.
15. Remove seals from face level vents.

Refit

1. Fit seals to face level vents on new louvre panel.
2. Fit louvre panel to fascia and secure with screws.
3. Models with A/C: Connect multiplugs to ATC ECU and fit ATC ECU to fascia.
4. Models without A/C: Fit screws securing heater control panel to louvre panel.
5. Models without A/C: Fit heater control panel graphic plate and secure with screws.
6. Models without A/C: Fit blower speed and heater control knobs.
7. Position switch pack, connect multiplugs to switches and fit switch pack to louvre panel.
8. Position clock assembly, connect multiplug to clock and door locking switch and fit clock assembly to louvre panel.
9. Fit drinks tray.
10. Fit and secure radio DIN socket.
11. Fit screw cover to radio aperture.
12. Fit radio cassette player.