Sunroof - Front

76.84.01 Sunroof - Front

Remove

1. Remove headlining.
2. Remove front sunroof motor.







3. Disconnect drain tubes from sunroof tray.
4. Remove 14 screws securing sunroof tray to sunroof frame.
5. Carefully remove sunroof tray.
6. With assistance, remove sunroof frame and glass assembly.

Refit

1. With assistance, fit sunroof frame and glass assembly.







2. Position sunroof tray to roof and locate on front edge and on rear location pin, arrowed in illustration.
3. Fit Torx screws securing sunroof tray to frame and tighten to 2 Nm (1.5 lbf.ft) in the order shown.
4. Connect drain tubes to sunroof.
5. Fit sunroof motor. Do not fit headlining at this stage.
6. Check operation of sunroof.
7. Pour water over sunroof and check for water leaks.
8. Fit headlining.