Seat - Front

78.10.43.99 Seat - Front

Remove

1. Disconnect battery earth lead.







2. Remove 3 screws and 1 trim clip securing lower trim casing to seat.
3. Remove lower trim casing.







4. Remove cap from front seat belt lower anchorage bolt.
5. Remove front seat belt lower anchorage bolt.







6. Remove 4 Torx bolts and nut securing front seat to floor.
7. Lean seat forward to gain access to multiplugs.







8. Release pretensioner multiplug from seat frame and disconnect.
9. Electrically operated seats: Disconnect 2 seat motor multiplugs.
10. Remove front seat.

Refit

1. Fit front seat in vehicle.
2. Electrically operated seats: Connect seat motor multiplugs.
3. Connect pretensioner multiplug and secure to seat frame.
4. Fit Torx bolts and nut securing front seat to floor and tighten to 45 Nm (33 lbf.ft).
5. Fit front seat belt lower anchorage bolt to front seat and tighten to 32 Nm (24 lbf.ft).
6. Fit cap to lower anchorage bolt.
7. Fit lower trim casing to seat and secure with screws and trim clip.
8. Connect battery earth lead.