Cover - Squab - RH Rear Seat

78.90.13 Cover - Squab - RH Rear Seat

Remove

1. Remove rear seat.
2. Remove centre rear seat belt.







3. Remove 2 screws securing end cover and remove end cover.







4. Remove both head restraint guide tubes.
5. Remove 2 screws securing squab release lever, release cable and remove lever assembly.







6. Release catches securing arm rest supports, lower arm rest, release arm rest hinge catches and remove arm rest assembly.







7. Release squab from 10 hooks in arm rest recess.
8. Release top and bottom rap round clips in arm rest recess.
9. Remove 3 studs securing squab to centre of frame.
10. Release squab from 5 studs securing RH side.
11. Release 9 side clips securing squab to frame, release and remove squab assembly.







12. Release squab from sides of pad to access hog rings.
13. Remove 29 hogs rings and remove squab cover from pad.

Refit

1. Position squab to pad and secure with hog rings.
2. Position squab assembly to frame and secure side clips.
3. Secure squab to hooks at RH side and fit studs to centre of frame.
4. Fit top and bottom rap round clips and hooks in arm rest recess.
5. Fit and secure arm rest assembly.
6. Position squab release lever, connect cable and secure with screws.
7. Fit head restraint guide tubes.
8. Position end cover and secure with screws.
9. Fit centre rear seat belt.
10. Fit rear seat.