Latch - Rear Seat

78.80.12 Latch - Rear Seat

Remove







1. Remove 3 screws securing seat end cover and remove from seat assembly.







2. Carefully release 11 clips securing seat assembly backboard.
3. Remove seat assembly backboard.







4. Release outer cable from seat frame bracket and disconnect inner cable from lower quadrant.







5. Carefully release 2 clips securing seat latch to housing.
6. Compress spring to access release cable, disconnect cable nipple from latch and remove.
7. Remove 2 screws securing squab release latch housing to seat assembly.
8. Remove squab latch housing from seat assembly.
9. Remove cable assembly from squab latch housing.

Refit

1. Fit and secure seat squab release cable to latch housing.
2. Fit and secure cable and latch housing to seat assembly with screws.
3. Connect inner cable to lower quadrant.
4. Clip outer cable into seat frame bracket.
5. Fit and secure rear seat back board.
6. Fit and secure seat end cover with screws.