Rear Evaporator/Blower Assembly

Rear evaporator/blower assembly







The rear evaporator/blower assembly cools and dehumidifies air from the cabin and supplies it to the rear distribution system. The unit is installed on the left side of the loadspace, behind the quarter trim. A grille in the quarter trim allows air to flow from the loadspace into the evaporator/blower. Refrigerant lines for the evaporator and a condensate drain tube are attached to the rear floor.

The evaporator and blower are installed in a common housing, which also incorporates the resistor pack for the blower. A thermostatic expansion valve is integrated into the inlet refrigerant line. A rear blower relay is attached to the top of the housing.