Headlamp: Service and Repair

Headlamp - To MY03

Service Repair No - 86.40.49

Remove
1. For RH headlamp: Release fixings and remove battery cover.





2. Remove headlamp access cover from body.





3. Release headlamp from locating sockets.
4. Disconnect multiplugs from headlamp and side lamp bulbs.
5. Remove headlamp.





6. Remove side lamp bulb holder from headlamp.
7. Remove rubber cover from headlamp.
8. Release headlamp bulb retaining clip and remove headlamp bulb.
9. Remove 6 screws and remove headlamp retaining sockets.

Refit
1. Fit retaining sockets to new headlamp and secure with screws.
2. Fit headlamp bulb and secure with clip.
3. Fit rubber cover.
4. Fit side lamp bulb holder.
5. Position headlamp and connect multiplugs.
6. Fit headlamp onto locating pins.
7. Check headlamp beam alignment.
8. Fit headlamp access cover.
9. For RH headlamp: Fit battery cover and secure with fixings.