SRS Harnesses and Connectors

SRS harnesses and connectors







Always observe the following precautions with regard to SRS Systems:
^ Never attempt to modify, splice or repair SRS wiring. SRS wiring can be identified by a special yellow outer protective covering (black with yellow stripe protective coverings are sometimes used).
^ Never install electronic equipment (such as a mobile telephone, two way radio or in-car entertainment system) in such a way that it could generate electrical interference in the airbag harness. Seek specialist advice when installing such equipment.







CAUTION:
^ Always ensure the SRS harness is routed correctly. Avoid trapping or pinching the SRS harness. Look out for possible chafing points.
^ Ensure all SRS harness connectors are mated correctly and securely fastened. Do not leave the connectors hanging loose.
^ Do not allow the airbag module to hang by the airbag harness.