Vehicle Lifting Note!

HYDRAULIC VEHICLE RAMP (FOUR POST)

Use only a "drive on" type ramp which supports vehicle by its own road wheels. If a "wheel-free" condition is required, use a "drive on" ramp incorporating a "wheel-free" system that supports under axle casings. Alternatively, place vehicle on a firm, flat floor and support on axle stands.

TWO POST VEHICLE RAMPS

The manufacturer DOES NOT recommend using "Two Post" ramps that employ four adjustable support arms. These are NOT considered safe for Rover vehicles.

If a vehicle is installed on a Two Post ramp, responsibility for safety of the vehicle and personnel performing service operations is attributable to the Service Provider.

CAUTION

Be sure to review Lifting, Towing and Transporting procedures before starting work.