Self Levelling System (SLS)

SLS Calibration Blocks

Service Repair No - 64.50.38

Fit

1. Ensure contact faces of calibration blocks LRT64-003/1 and LRT-64-003/2 are clean.





2. Operate the SLS system to raise the body, position the calibration blocks LRT-64-003/1 and LRT-64-003/2 between the rear axle and the body, then lower the body onto the calibration blocks. The calibration blocks are handed and only fit one way.

Remove

1. Operate the SLS system to raise the body, remove the calibration blocks LRT-64-003/1 and LRT-64-003/2 from between the rear axle and the body.