Pressure Regulating Solenoid: Service and Repair

Pressure Regulator

Service Repair No - 44.40.21

Remove

1. Remove valve body assembly.





2. Release and remove clip securing pressure regulator solenoid valve harness to valve body.
3. Disconnect multiplug from pressure regulator solenoid valve.





4. Remove 5 Torx screws securing pressure regulator to valve body and remove pressure regulator.

Refit

1. Clean pressure regulator and mating face with a lint free cloth.
2. Position pressure regulator to valve body, fit Torx screws and tighten to 8 Nm (6 ft. lbs.).
3. Connect multiplug to pressure regulator solenoid valve, fit clip and secure harness to valve body.
4. Fit valve body assembly.