Shift Shaft Seal, A/T

Seal - Selector Shaft

Service Repair No - 44.15.34

Remove

1. Remove valve body assembly.





2. Remove nut securing selector shaft lever and release lever from shaft.
3. Remove 2 bolts securing gear selector switch to gearbox and remove switch.





4. Drift out and discard selector quadrant roll pin.
Remove selector shaft.
5. Remove selector quadrant and connecting rod.
6. Remove oil seal taking care not to damage seal housing.

Refit

1. Clean shaft and seal housing.
2. Using a suitable adapter, fit new seal.
3. Position selector quadrant and connecting rod.
4. Position selector shaft and secure to quadrant using new roll pin.
5. Fit valve body assembly.